Introduction

This is microprocessor based Ultrasoniclevel transmitter. It has Multifunction Instruments It is capable of monitoring Virtually Any Short Or Medium Range of Non-Contact Ultrasonic Level Measurements of Liquids, Solids Or Slurries. In this Instrument User can take measurements of Roller Lift of mills, water level and select the range in the range parameter and set Reverse action
in Action parameter. It has One Analog Output 4-20mA(Isolated) and two digital control output (we can also define these two digital control output as relay1and Relay2)

TOP ROLLER LIFT INDICATOR TRANSMITTER

Latest and modern technology based Mill Top Roller Lift Measurement through Ultrasonic type sensor and solid state digital indication systems specially design for measurement and display of Mill Top Roller Lift. Ultrasonic Sensors shall be Top Mounted on Mill Top Roller and Digital indicators are designed for Panel mounting in industry environment. The digital indicator indicates the instantaneous value of Roller Lift (0-50mm) is to be measured through Ultrasonic type Sensors and Transmitters. Please read the instructions carefully before installing the system

INSTALLATION OF ROLLER LIFT SENSOR TRANSMITTER

A rod will be welded at the pressure plate of top roller and at the top of this rod a square 4”×4” MS plate will be welded at rod’s Centre, Then we will insert and fit a Ltype support arrangement with ultrasonic transmitter and then the system will be placed 290 mm
above the square plate.( the sensor tip of transmitter should be 290 mm above the Centre of  plate) because 24cm is the dead zone of transmitter. Show in fig1.

Specification